Instalación de Varnish en CPanel (VHM) en Centos 5.5

Apache non-SSL IP/port = 8888

DAEMON_OPTS="-a :80 \
VARNISH_LISTEN_PORT=80

# Configuration file for varnish
#
# /etc/init.d/varnish expects the variable $DAEMON_OPTS to be set from this
# shell script fragment.
#

# Maximum number of open files (for ulimit -n)
NFILES=131072

# Locked shared memory (for ulimit -l)
# Default log size is 82MB + header
MEMLOCK=82000

# Maximum size of corefile (for ulimit -c). Default in Fedora is 0
# DAEMON_COREFILE_LIMIT="unlimited"

# Set this to 1 to make init script reload try to switch vcl without restart.
# To make this work, you need to set the following variables
# explicit: VARNISH_VCL_CONF, VARNISH_ADMIN_LISTEN_ADDRESS,
# VARNISH_ADMIN_LISTEN_PORT, VARNISH_SECRET_FILE, or in short,
# use Alternative 3, Advanced configuration, below
RELOAD_VCL=1

# This file contains 4 alternatives, please use only one.

## Alternative 1, Minimal configuration, no VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# content server on localhost:8080.  Use a fixed-size cache file.
#
#DAEMON_OPTS="-a :6081 \
#             -T localhost:6082 \
#             -b localhost:8080 \
#             -u varnish -g varnish \
#             -s file,/var/lib/varnish/varnish_storage.bin,1G"

## Alternative 2, Configuration with VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# one content server selected by the vcl file, based on the request.  Use a
# fixed-size cache file.
#
DAEMON_OPTS="-a :80 \
             -T localhost:6082 \
             -f /etc/varnish/default.vcl \
             -u varnish -g varnish \
             -S /etc/varnish/secret \
             -s file,/var/lib/varnish/varnish_storage.bin,1G"

## Alternative 3, Advanced configuration
#
# See varnishd(1) for more information.
#
# # Main configuration file. You probably want to change it :)
VARNISH_VCL_CONF=/etc/varnish/default.vcl
#
# # Default address and port to bind to
# # Blank address means all IPv4 and IPv6 interfaces, otherwise specify
# # a host name, an IPv4 dotted quad, or an IPv6 address in brackets.
# VARNISH_LISTEN_ADDRESS=
VARNISH_LISTEN_PORT=80
#
# # Telnet admin interface listen address and port
VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
VARNISH_ADMIN_LISTEN_PORT=6082
#
# # Shared secret file for admin interface
VARNISH_SECRET_FILE=/etc/varnish/secret
#
# # The minimum number of worker threads to start
VARNISH_MIN_THREADS=1
#
# # The Maximum number of worker threads to start
VARNISH_MAX_THREADS=1000
#
# # Idle timeout for worker threads
VARNISH_THREAD_TIMEOUT=120
#
# # Cache file location
VARNISH_STORAGE_FILE=/var/lib/varnish/varnish_storage.bin
#
# # Cache file size: in bytes, optionally using k / M / G / T suffix,
# # or in percentage of available disk space using the % suffix.
VARNISH_STORAGE_SIZE=1G
#
# # Backend storage specification
VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"
#
# # Default TTL used when the backend does not specify one
VARNISH_TTL=120
#
# # DAEMON_OPTS is used by the init script.  If you add or remove options, make
# # sure you update this section, too.
DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
             -f ${VARNISH_VCL_CONF} \
             -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} \
             -t ${VARNISH_TTL} \
             -w ${VARNISH_MIN_THREADS},${VARNISH_MAX_THREADS},${VARNISH_THREAD_TIMEOUT} \
             -u varnish -g varnish \
             -S ${VARNISH_SECRET_FILE} \
             -s ${VARNISH_STORAGE}"
#

## Alternative 4, Do It Yourself. See varnishd(1) for more information.
#
# DAEMON_OPTS=""

# This is a basic VCL configuration file for varnish.  See the vcl(7)
# man page for details on VCL syntax and semantics.
#
# Default backend definition.  Set this to point to your content
# server.
#
backend default {
  .host = "200.123.134.50";
  .port = "8888";
}
#
# Below is a commented-out copy of the default VCL logic.  If you
# redefine any of these subroutines, the built-in logic will be
# appended to your code.
# sub vcl_recv {
#     if (req.restarts == 0) {
#       if (req.http.x-forwarded-for) {
#           set req.http.X-Forwarded-For =
#               req.http.X-Forwarded-For + ", " + client.ip;
#       } else {
#           set req.http.X-Forwarded-For = client.ip;
#       }
#     }
#     if (req.request != "GET" &&
#       req.request != "HEAD" &&
#       req.request != "PUT" &&
#       req.request != "POST" &&
#       req.request != "TRACE" &&
#       req.request != "OPTIONS" &&
#       req.request != "DELETE") {
#         /* Non-RFC2616 or CONNECT which is weird. */
#         return (pipe);
#     }
#     if (req.request != "GET" && req.request != "HEAD") {
#         /* We only deal with GET and HEAD by default */
#         return (pass);
#     }
#     if (req.http.Authorization || req.http.Cookie) {
#         /* Not cacheable by default */
#         return (pass);
#     }
#     return (lookup);
# }
#
# sub vcl_pipe {
#     # Note that only the first request to the backend will have
#     # X-Forwarded-For set.  If you use X-Forwarded-For and want to
#     # have it set for all requests, make sure to have:
#     # set bereq.http.connection = "close";
#     # here.  It is not set by default as it might break some broken web
#     # applications, like IIS with NTLM authentication.
#     return (pipe);
# }
#
# sub vcl_pass {
#     return (pass);
# }
#
# sub vcl_hash {
#     hash_data(req.url);
#     if (req.http.host) {
#         hash_data(req.http.host);
#     } else {
#         hash_data(server.ip);
#     }
#     return (hash);
# }
#
# sub vcl_hit {
#     return (deliver);
# }
#
# sub vcl_miss {
#     return (fetch);
# }
#
# sub vcl_fetch {
#     if (beresp.ttl <= 0s ||
#         beresp.http.Set-Cookie ||
#         beresp.http.Vary == "*") {
#               /*
#                * Mark as "Hit-For-Pass" for the next 2 minutes
#                */
#               set beresp.ttl = 120 s;
#               return (hit_for_pass);
#     }
#     return (deliver);
# }
#
# sub vcl_deliver {
#     return (deliver);
# }
#
# sub vcl_error {
#     set obj.http.Content-Type = "text/html; charset=utf-8";
#     set obj.http.Retry-After = "5";
#     synthetic {"
# <?xml version="1.0" encoding="utf-8"?>
# <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
#  "<a href="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
#">http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
#</a> <html>
#   <head>
#     <title>"} + obj.status + " " + obj.response + {"</title>
#   </head>
#   <body>
#     <h1>Error "} + obj.status + " " + obj.response + {"</h1>
#     <p>"} + obj.response + {"</p>
#     <h3>Guru Meditation:</h3>
#     <p>XID: "} + req.xid + {"</p>
#     <hr>
#     <p>Varnish cache server</p>
#   </body>
# </html>
# "};
#     return (deliver);
# }
#
# sub vcl_init {
#       return (ok);
# }
#
# sub vcl_fini {
#       return (ok);
# }

Date    Sat, 26 Nov 2011 14:49:58 GMT
X-Varnish       783030740
Age     0
Via     1.1 varnish

You can check the parameters of Varnish by connecting to the CLI (usually using varnishadm). Issue the command "param.show". Send timeout's default is 60 seconds. You can increase this by adjusting the runtime arguments of your varnishd instance. On CentOS I control this in /etc/sysconfig/varnish - Debian should be something similar. Just add "-p send_timeout=600" to allow up to 10 minutes for file downloads.